How to find the ideal hall heating

First of all, realize that industrial and commercial buildings have different heating requirements than homes or offices. Sounds trivial? But it's not. In fact, many planners still make the mistake of using a similar heating strategy to that used for multi-storey buildings. The problem: warm air rises upwards. With low ceiling heights, such as in offices or apartments, this is not relevant. In halls, on the other hand, the warm air collects virtually uselessly at great heights under the hall roof.

Until it is pleasantly warm on the floor, operators have to channel a lot of heating energy into the hall and use systems that direct air flows back down again. This is basically a waste of money, as heat in large halls is usually only required at a person height of around two meters, but not at higher levels. It is therefore usually sufficient to heat 20 percent of the room volume. Even then, employees are pleasantly warm and can develop their full productivity.

Find the right technology for your hall heating

Now the question arises as to which technology should be used to optimize the approximately 20 percent of your Targeted heating of the hall. If you look around the market, you'll notice: There are centralized and decentralized Heating systems. Central systems include industrial underfloor heating systems, centrally supplied, water-based air heaters and hot water radiant ceiling panels. They work with a central energy generator and a pipe system that transports hot water to the desired location.

Decentralized heating systems, on the other hand, include infrared radiators that can be installed under the ceiling. They are gas-powered and work with electromagnetic waves. As soon as the waves hit a solid object, such as a person or the room frame, the energy is converted into heat. The highlight: infrared radiators do not heat the air! This means that only the occupied and usage areas are heated.

At the same time, hall operators enjoy flexibility. They divide the hall into different heating zones using several infrared radiators - and provide employees in order picking, for example, with more heat than colleagues in production, where Machines already provide sufficient basic heat provide. Flexibility that increases employee satisfaction. These decentralized solutions also make it easier to adapt the system when the hall is converted compared to a centralized system.

Another advantage of the Infrared technologyIt is quick to react. Operators switch the heating on and off in a similar way to a light. As the energy does not take a detour via the air, heat is available virtually at the touch of a button. And in the age of automation, you don't even need to switch it on and off manually. This task is performed by intelligent control technology, which adapts the heating output to the changing conditions. Users thus reduce energy costs by up to 70 percent, so that the investment in the heating system pays for itself in a short time.

Get an overview of the requirements of your hall

In order for hall heating systems to develop their full potential, they should be adapted to your hall like a tailor-made suit. However, this adaptation by an external service provider will only be successful if you have a clear picture of your hall building, the hall usage and your requirements for the heating in advance. Pay particular attention to the factors that could influence the temperature. These questions can help you:

The answers to these questions form a foundation on which your heating partner can build.

Think through different energy sources for your hall heating system

In times of climate change, the German government's targets are ambitious: Germany is to be climate-neutral by 2045 at the latest. The economy is making corresponding efforts, CO2-emissions. Many companies are saying goodbye to heating oil, which will be banned for new buildings from 2026 anyway, and are instead focusing on renewable energies and technologies such as solar thermal energy or electric heat pumps.

If you decide to go down this route, however, you should be aware that you are committing to a central heating system. And for this you need a hydraulic distribution system. In addition, such a system is often associated with two to four times higher investment costs and is comparatively slow to react, meaning that in many cases the heat supply cannot be adapted quickly enough to dynamic requirements.

Infrared heaters work with natural gas. However, compared to other fossil fuels, this gas is considered the CO2-It is also the least polluting of the traditional fuels, as it has the lowest primary energy factor of all. In addition, natural gas is becoming increasingly green due to the upcoming feed-in of regeneratively produced hydrogen (power-to-gas technology) and is considered one of the most sustainable energy sources, especially in conjunction with the excellently developed gas network in Germany.

Now you may be asking yourself: The new Building Energy Act (GEG) stipulates that in future I may only use renewable energies for heating. Aren't infrared radiators prohibited? No! According to the GEG, you are no longer bound to renewable energy sources if the hall is over four meters high. While central heating systems are obliged to use renewable energy in order to meet the GEG requirements, these can also be implemented with natural gas using the most efficient infrared hall heating technology. This means you don't have to worry about compliance.

Take a close look at suppliers of hall heating systems

 To ensure that you find an efficient and future-proof hall heating system, you should check the competence of providers in advance. The following questions can be used as a guide:

It is also advisable to focus not only on the price of the hall heating system, but also on the total cost of ownership (TCO) - i.e. the operating costs over the entire life cycle. Only with this value can you calculate whether it is a worthwhile investment.

Heating for halls: Challenges and solutions

The first challenge in heating halls: The special structural features

The biggest challenge in terms of heating for halls is probably the enormous volume of hall buildings and their ceiling heights of four, ten or more meters. Keeping these buildings at a constant working temperature in winter is anything but trivial. Especially if the energy costs are not to get out of hand. Added to this is the difficulty that no two industrial or commercial buildings are the same. High racks, overhead cranes, a wide variety of floor plans and usage profiles place very specific demands on the heating system to be installed.

Simply distributing a few heating devices around the room is not enough here. Due to their size and height, hall buildings have very special requirements in terms of building physics, which differ fundamentally from multi-storey buildings. That's why it's worth consulting a qualified hall heating expert to avoid having to live with compromises in terms of functionality and end up investing a lot of money unnecessarily for inadequate performance.

Not always in view, but a relevant factor when heating halls: Employee needs and a productive indoor climate

The structural characteristics of hall buildings also make it difficult to Indoor climate and thus ensure a good working atmosphere. However, this is a particularly important factor for the productivity of your employees: ideally, the temperature in the work area should be between 18 and 20 °C. But not every employee needs the same temperature. However, not every employee needs the same temperature: those who work physically would naturally like it to be cooler than their colleagues who work quietly while sitting or standing. This presents a further challenge when choosing the right heating system for your halls, as it means that you need to plan different zones that can be heated flexibly. Both in terms of work areas and usable zones.

Different hall zones require flexible systems

Let's take a closer look at what everyday life looks like in industrial and commercial buildings: In one area of the hall, goods that are sensitive to temperature and condensation are stored and must be kept at a constant temperature. At the other end, a door is left open despite the freezing outside temperature - why close it if it has to be opened again? There is no need to run the heating here. It would be a waste of energy and money. In between are the aforementioned workstations with different temperature requirements.

There are also overhead cranes that are occasionally parked under the heater and block the heat radiation. Perhaps the heating is also switched off overnight to keep operating costs low - and has to heat up again the next morning in time for the start of operations. Without long lead times, of course. In view of all these points, it makes little sense to rely on heating systems for halls that continuously heat the air. Flexible systems are needed!

Energy and climate policy is moving more into focus

However, when it comes to heating systems for halls, it is no longer just what happens inside the hall that counts. What happens outside the building is also becoming increasingly relevant. We are talking here about climate protection and therefore energy consumption. By 2030, primary energy consumption in Germany is to be reduced by 30 % compared to 2008, and halved by 2050 - according to the Federal Ministry for Economic Affairs and Energy's Energy Efficiency Strategy 2050. Germany wants to promote energy efficiency in the building sector in particular.

For hall owners who are planning a new heating system, this means the next challenge is to to use the most efficient heating systems and fuels with the lowest possible emissionsto reduce energy consumption to a minimum. Ideally, the residual heat is also used to really get the most out of the heating for your halls. Making optimum use of energy in this way protects the environment and is in line with climate protection targets. Because one thing is clear: less fuel consumption means lower emissions. But it is also in your own interest to opt for energy-saving hall heating systems. Because:

The question of the right heating system for your halls is closely linked to the question of costs

Over their life cycle, hall heating systems consume six to twenty times more energy than the investment costs. This makes the operation of these heating systems significant cost drivers for hall owners, which are difficult to get under control without an efficient, flexible system. Let's go back to the aspects that arise from the structural features and everyday working life.

Heating the entire room volume: Unnecessary energy consumption. Air heated by warm air heaters that accumulates under the hall ceiling: Unnecessary energy consumption. Heating unused areas of the hall: Unnecessary energy consumption. Overheated hall areas because the heating cannot be flexibly controlled: Unnecessary energy consumption. Heaters that continue to heat even when the hall doors are open: Unnecessary energy consumption. Heaters that have only been heating up the overhead crane parked underneath for hours: Unnecessary energy consumption. Heating that does not match the hall's overall usage profile - unnecessary energy consumption.

The list could go on and on, but it has certainly already become clear: Only modern, intelligent heating systems that have been specifically developed as heating systems for halls can help you to avoid such energy waste traps and thus keep both investment and running costs low. And this also with a view to the future. Because heating costs will continue to rise in the coming years. The reason for this is the new legislation in force since January 01, 2021 CO2-tax for the use of fossil fuels. It therefore makes sense to focus on a particularly CO2-fuel such as gas and a highly efficient heating system for your halls - unless you want to accept the rising costs.

This makes it clear that there are a whole range of challenges when selecting heating systems for halls. It's good to know them and be able to avoid them. This raises the final question:

What is the solution to these challenges?

As described at the beginning, no two halls are the same. The selection of the right heating system for your halls must therefore also take your individual circumstances into account. There is no one-size-fits-all solution. In principle, however, from a ceiling height of four meters, you can master all the challenges mentioned with a modern, gas-powered infrared radiator system. With the help of intelligent control technology and modular extensions, problems such as open hall doors can be detected and the heating in this area can be switched off.

The heating can meet different temperature requirements depending on the zone. As infrared radiant heaters do not heat the air per se, there is neither dust turbulence nor unpleasant draughts. Nor does warm air accumulate unused under the hall ceiling. Put simply, this type of heating only heats what is really needed. In combination with natural gas as a fuel (which has a high primary energy factor and is becoming increasingly green) and clever use of residual heat (for example to heat adjacent offices), you kill all birds with one stone: manageable investment costs. High energy efficiency. Satisfied employees. Low total cost of ownership. Environmental protection. So choose the right solution from the outset when selecting heating for your halls!